# PowerBI Command - Doesn't register failure

**URL:** <https://community.easymorph.com/t/powerbi-command-doesnt-register-failure/6701>\
**Category:** Support\
**Created:** [June 19, 2026, 2:10pm UTC](https://community.easymorph.com/t/powerbi-command-doesnt-register-failure/6701 "2026-06-19T14:10:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlbertFabritius](https://community.easymorph.com/user_avatar/community.easymorph.com/albertfabritius/32/4998_2.png) [@AlbertFabritius](https://community.easymorph.com/u/AlbertFabritius)\
**Post date:** [June 19, 2026, 2:10pm UTC](https://community.easymorph.com/t/powerbi-command-doesnt-register-failure/6701/1 "2026-06-19T14:10:42Z")

</div>

Hi EasyMorph Team,

we're having a challenge with the PowerBI command. We're using it to refresh datasets. However, when the refresh fails, the action does not register/report the issue. When checking the refresh history at the PBI Online log, it doesn't show any attempt to refresh, neither successful, nor unsuccessful. It's and intermittent issue, it sometimes works, other times it does not. Is there anything we could or should do to mitigate?

 ![image](https://community.easymorph.com/uploads/default/original/2X/1/1cc608e1dea42342e19ae255f28180b727666a26.png)

---

<div class="post-metadata">

**Author:** ![andrew.rybka](https://community.easymorph.com/user_avatar/community.easymorph.com/andrew.rybka/32/13_2.png) [@andrew.rybka](https://community.easymorph.com/u/andrew.rybka)\
**Post date:** [June 19, 2026, 3:21pm UTC](https://community.easymorph.com/t/powerbi-command-doesnt-register-failure/6701/2 "2026-06-19T15:21:28Z")

</div>

Hi Albert, we are looking into it. Does this happen with all the datasets or with only some of them?

---

<div class="post-metadata">

**Author:** ![AlbertFabritius](https://community.easymorph.com/user_avatar/community.easymorph.com/albertfabritius/32/4998_2.png) [@AlbertFabritius](https://community.easymorph.com/u/AlbertFabritius)\
**Post date:** [June 19, 2026, 3:35pm UTC](https://community.easymorph.com/t/powerbi-command-doesnt-register-failure/6701/3 "2026-06-19T15:35:57Z")

</div>

Hi Andrew, thanks a lot! We have observed it with several differente datasets.

---

<div class="post-metadata">

**Author:** ![andrew.rybka](https://community.easymorph.com/user_avatar/community.easymorph.com/andrew.rybka/32/13_2.png) [@andrew.rybka](https://community.easymorph.com/u/andrew.rybka)\
**Post date:** [June 23, 2026, 3:14pm UTC](https://community.easymorph.com/t/powerbi-command-doesnt-register-failure/6701/4 "2026-06-23T15:14:44Z")

</div>

Hi Albert, can you please answer a few additional questions?

1. How do you know that a refresh failed if it's not reported in History?
2. Does this issue affect regular datasets or push-datasets (created by, among other ways, EasyMorph's Export to Power BI action)? Push datasets can't be refreshed because they don't have a linked data source.